Table of Contents
Advertisement
en Basic settings
As soon as a software update is available, you will be
informed via the Home Connect app and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
stalling it via the Home Connect app if you are in your
WLAN home network (Wi-Fi). The Home Connect app
will inform you once installation is successful.
Notes
¡ You can continue to use your appliance as normal
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
¡ We recommend that you install security updates as
soon as possible.
¡ Installation takes a few minutes. You cannot use
your appliance during installation.
16.5 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip: For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
17 Basic settings
You can configure the appliance to meet your needs.
17.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting
Language
Clock
Date – day
Date – month
Date – year
Signal tone
Button tone
Display brightness
Clock display
Lighting
1
Factory setting (may vary according to model)
24
Selection
See selection on the appli-
ance.
Clock in 24-hour format.
Sets the current day
Sets the current month
Sets the current year
Short cooking time
1
Medium cooking time
Long cooking time
Switched on
1
Switched off
5 settings
off
1
Digital + date
Analogue
Off during operation
1
On during operation
16.6 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡ Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note: Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
Basic setting
Auto resume
(only applicable for the
Microwave operating
mode)
Childproof lock
After switch-on
Warning: Baking tray in
MW
Night-time dimming
Brand logo
Dry microwave
Fan run-on
Telescopic rails
Sabbath mode
1
Factory setting (may vary according to model)
Selection
Do not resume microwave
1
automatically
When closing the door
1
Keylock only
Main menu
1
Types of heating
Microwave
Microwave combination
Dishes
1
Display
Do not display
1
Switched off
Switched on
1
Display
Do not display
1
Switched on
1
Switched on
1
Recommended
Minimum
1
Retrofitted
Not retrofitted
Switched on
1
Switched off
Advertisement
Table of Contents
