Wi-Fi Control: Installation Instructions
Information for users
The following steps explain how to connect the MAC-558IF-E
Adaptor to a router.
KEY (LED LIGHTS):
ON
1
Check Wi-Fi and WPS are enabled
on your router. Connection
procedure varies depending on
your router – refer to router manual
for more information.
3
Activate WPS on your adaptor by
using a small object to press and hold
the WPS button for two seconds.
6
OFF
FLASHING
2
Activate WPS on your router.
This will be enabled for a set
period allowing approximately two
minutes to complete Step 3.
4
Turn the adaptor over and check
LED 1 (top light) is flashing.