Mitsubishi Electric MAC-558IF-E Installation Manual page 5

3
Remove the cover of the indoor
unit, the cable terminal, and the
cover to the control unit board.
5
Run the cables down the back of
the unit with the other cables. Tuck
cabling away and secure.
7
Check that the MAC-558IF is
flashing. The install has now
been completed.
4
Locate the CN105 port on the
main control board and connect
MAC-558IF.
6
Reassemble the air conditioning
unit and restore power to the
system.
8
The adaptor is now able to be
connected to the user's router.
Steps for this are shown on the
following pages.
5