Rear Panel - Yamaha DTX-PRO Owner's Manual

Rear Panel

TP70
XP80
PCY135
Standard stereo phone plug (6.3 mm)
[USB TO DEVICE]
terminal (page 21)
Connects a USB flash
drive. Cannot be used with
other USB devices.
 "Using a USB Flash
Drive" (page 21)
[USB TO HOST] terminal (page 61)
Connect a computer or smart device such as a smart phone or a
tablet to send and receive digital signals (audio and MIDI).
Additional parts are required for connecting a smart device. For
more information, refer to "iPhone/iPad Connection Manual" or
"Smart Device Connection Manual for Android™" (PDF).
Computers  "Connecting a Computer" (page 61)
Reference Manual (PDF)
Smart devices  "Using Smart Devices" (page 60)
Trigger Input jacks
[!4 ] jack to [qSNARE] jack
Connects the DTX series pads.
To connect the pads included in your
Drum Kit, refer to the Assembly Manual.
These trigger input jacks also accept
separately sold add-ons. For more infor-
mation, see "About the Trigger Input
Jacks" (page 57).
DC IN jack (page 14)
Use the AC adaptor that
came with the DTX-
PRO.
USB cable
[MIDI OUT] connector
Connects a MIDI device to send MIDI messages
from the DTX-PRO.
Standard phone plug
(6.3mm)
OUTPUT [R]/[L/MONO] jacks (page 14)
Connect to powered speakers or other such PA system.
These jacks are standard phone type output jacks.
If mono output is required, use only the [L/MONO] jack.
Cord hook
Wrap the AC adaptor cord around this hook to prevent accidental
unplugging during use.
CAUTION
Excessive bending can dam-
age the AC adaptor cord and
create a fire hazard. For this
reason, make sure that the
power cord is not bent at an
extreme angle when wrapped
around the hook.
Panel Controls and Functions
MIDI cable
AC adaptor cord
Cord hook
DTX-PRO Owner's Manual 13