Table of Contents
Advertisement
6 WebGUI
6.1
General access
To configure the FiberGateway, you must place the network terminal, for example a personal
computer, connected to the LAN, whose network configuration mode must be automatic. In this mode
the personal computer will receive an IP address between 192.168.1.64/24 and 192.168.1.253/24 in
addition to the other necessary network parameters. Then enter the URL address, http://192.168.1.254
in a Web browser, where you will have access to the following page:
Figure 16: Login to FiberGateway
47
WebGUI
Advertisement
Table of Contents
Need help?
Do you have a question about the FGW GR140DG Wi-Fi 6 and is the answer not in the manual?
Questions and answers