Sealey VS004 Instructions

PARTS DIAGRAM FOR:
FAST FILL COOLANT GUN
VS004
Model:
Item.Part No. Description
1 VS004.01 BRASS BODY ASSEMBLY
2 VS004.02 STAINLESS STEEL WASHER
3 VS004.03 RUBBER CONE
4 VS004.04 GAUGE
5 VS004.05 HOSE ASSEMBLY
6 VS004.06 CHECK VALVE KIT
7 VS004.07 SLEEVE ASSEMBLY
8 VS004.08 VACUUM MOTOR ASSEMBLY
9 VS004.09 GUN ASSEMBLY
11 VS004.11 MOULDED CASE (NOT SHOWN)
12 VS004.12 TAP ASSEMBLY
13 VS004.13 STRAINER
Issue No. 1
Issue date. 01/08/02
NOTE: It is our policy to continually improve products and as such we reserve
the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address,
including postcode.
Sole UK Distributor, Sealey Group, Bury St. Edmunds, Suffolk.
01284 757500 01284 703534
E-mail: sales@sealey.co.uk
INSTRUCTIONS FOR:
FAST FILL COOLANT GUN
VS004
Model:
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
Follow workshop Health & Safety rules, regulations and conditions when using this equipment.
!
WARNING! Disconnect from air supply before changing accessories or servicing.
F
Maintain the equipment in good condition and replace any damaged or worn parts. Use genuine
!
parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
WARNING! Check that correct air pressure is maintained and DOES NOT exceed 130psi.
F
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use
!
and ensure that all connections are secure.
Wear approved safety gloves and eye and ear protection.
!
Keep gun clean and in good working order for best and safest performance.
!
Keep children and unauthorised persons away from the work area.
!
DO NOT use the gun for a task it is not designed to perform.
%
WARNING! DO NOT use gun if damaged or thought to be faulty. Contact your local service agent.
F
p
DO NOT drop, throw or abuse the gun.
%
DO NOT carry the gun by the air hose, or yank the hose from the air supply.
%
DO NOT operate the gun if you are tired or under the influence of alcohol, drugs or intoxicating medication.
%
DO NOT direct air from the air hose at yourself or others.
%
When not in use disconnect from air supply and store in a safe, dry, childproof location.
!
2. SPECIFICATION
Air Pressure (min) . . . . . . . . . . . . . . . . . . 80psi (5.5 bar)
Air Pressure (max) . . . . . . . . . . . . . . . . . 100psi (6.9 bar)
Air Consumption (max @ 100psi) . . . . . 180l/min (10cfm)
Vacuum (max @ 100psi). . . . . . . . . . . . 25”Hg (0.85 bar)
Air Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BSP
Filling Hose Length . . . . . . . . . . . . . . . . . . . . . . 1500mm
VS004 - 2 - 010802