Features - Panasonic AK-HRP1010G Operating Instructions Manual

Features

This unit is a remote operation panel for controlling a studio handy camera (AK-HC5000/AK-UC3300/AK-UC4000) and a camera
control unit (AK-UCU500/AK-UCU600).
Scene files, user files, and lens files can be saved to a memory card.
The unit can be connected to one CCU (AK-UCU500/AK-UCU600) via a serial connection.
Eliminate the need for individual ROP cables by connecting up to 99 CCUs via a network hub (100base-TX switching hub).
The unit is equipped with PoE*
2
pliant)* .
The ROP Setup Software can be used to set the camera connections.
*1: Power over Ethernet. Referred to as "PoE" in this manual.
*2: For details on PoE power supply devices for which operation has been verified, consult your dealer or Panasonic representative.
1
, allowing connection to a network device that supports the PoE standard (IEEE802.3af com-
- 11 -
Introduction