NEC Express5800 Series User Manual page 47

Removal
1.
Power off the CPU blade to which the Tape Blade is being connected.
IMPORTANT:
Be very careful to power off the CPU blade that is connected with
the Tape Blade you are going to remove.
You cannot install or remove the Tape Blade while the CPU blade is
being powered on.
NOTE:
linking with the CPU blade.
2.
While pushing the eject button on the lower part of Tape Blade, pull the eject lever toward
you.
IMPORTANT:
The power of the Tape Blade is automatically turned off
Be sure to push the eject lever in the Tape Blade.
Setting Up Your Tape Blade
3-7