Using The Bottle Warmer With Express Milk Warming Setting - Philips Avent SCF355 User Manual

Using the bottle warmer with express milk warming setting

1
Put the mains plug in the wall socket� Place a bottle in the bottle warmer�
2
Fill the bottle warmer with drinking water up to the level of the milk in
the bottle� In case of large amounts of milk, the maximum level of water is
approximately 1 cm below the top of the bottle warmer� An accurate water level
ensures correct warming performance�
3
Select the desired setting based on the milk volume� See the express warming
reference table at the end of this chapter to check how long the milk needs to be
warmed in the selected setting�
Note
• The speed of warming milk depending on the amount of the milk warmed and on its initial
temperature, i.e. room temperature (
22 °C
) or fridge temperature (
- 8 -
5° C
).