Canon Perfect Binder-F1 User Manual page 60

Adjusting the Cover Image Placement
You can adjust the cover image placement if it is out of position in relation to the stacked
body pages.
Specify the cover image placement in millimeters or inches according to the directions on
the printer's display.
You can set the value from –0.2" to +0.2" [–5mm to +5mm] (in 0.01" [0.1 mm] increments).

Leftward orientation
Increasing the value of the setting moves
the cover image placement right in the X
direction or down (Bottom) in the Y
direction.
Decreasing the value of the setting moves
the cover image placement left in the X
direction or up (Top) in the Y direction.

Rightward orientation
X
Y
Increasing the value of the setting moves
the cover image placement left in the X
direction or up (Top) in the Y direction.
Decreasing the value of the setting
moves the cover image placement right
in the X direction or down (Bottom) in the
Y direction.
Adjustments from the Printer Display
X
Y
3
3-17