Mitsubishi Electric FR-F802 Instruction Manual page 10

1.2
Inverter component names
Component names are shown below.
(a)
(d)
(b)
(c)
(e)
(f)
Symbol Name
(a) RS-485 terminals
(b) Plug-in option connector 1
(c) Plug-in option connector 2
(d) Plug-in option connector 3
(e) Voltage/current input switch
(f) Control circuit terminal block
(g) PU connector
(h) USB A connector
(i) USB mini B connector
(j) Front cover (upper side)
(k) Power lamp
(l) Alarm lamp
(m) Charge lamp
(n) Operation panel (FR-DU08)
(o) Front cover (lower side)
(p) Main circuit terminal block
(q) Cooling fan

Refer to the FR-F800 Instruction Manual (Detailed)
(g)
(h)
(i)
(j)
(k)
(l)
(n)
(m)
(o)
Enables RS-485, Modbus-RTU, and BACnet communication.
Connects a plug-in option or a communication option.
Selects between voltage and current for the terminal 2 and 4 inputs.
Connects cables for the control circuit.
Connects the operation panel or the parameter unit. This connector also
enables the RS-485 communication.
Connects a USB memory device.
Connects a personal computer and enables communication with FR
Configurator2.
Remove this cover for the installation of the product, installation of a plug-in
(communication) option, RS-485 terminal wiring, switching of the voltage/
current input switch, etc.
Stays ON while the power is supplied to the control circuit (R1/L11, S1/L21).
Turns ON when the protective function of the inverter is activated.
Stays ON while the power is supplied to the main circuit.
Operates and monitors the inverter.
Remove this cover for wiring.
Connects cables for the main circuit.
Cools the inverter.
Inverter component names
Description
INTRODUCTION
(q)
(p)
Refer to
page
49
1
Instruction
Manual of
the option

33
47
48
48
15
29
73
29

15
28
84
9