MAINTENANCE AND ADJUSTMENT
A Caution : Read this page carefully to keep your safety.
Be sure to disconnect the power cable from the socket
before conducting the following operation.
MAINTENANCE
There is high voltage used inside this unit. Never open the case.
R E P L A C E M E N T OF FUSES
This oscilloscope will not function if the fuse has blown. If the fuse blows, determine the
c a u s e , and contact your dealer if the cause lies in this equipment.
If the cause w a s external to this equipment, remove the cause, detach the fuse holder
from the rear panel using a flatblade screwdriver, and insert a n e w f u s e .
For Electric Shock Protection:
Flatblade
Screwdriver
Fig. 17
Rear
Panel
27