Connecting The Unit To A Pc - Sharp HR-MB3 Operation Manual

Connecting the unit to a PC

HR-MB3
ENGLISH
Connect the unit to a PC to transfer audio data.
Note:
Make sure to turn the unit on before connecting the USB
cable. Otherwise the PC does not recognise the unit.
PC
To the USB port
E-11
HR-MB3 TINSZA173AWZZ
1
Connect the AC adaptor to the DC IN 6V socket
(see page 7).
2
Turn on the unit (see page 9).
3
Connect the unit to a PC with
the USB cable.
Whilst the unit is connected to the
PC, the message shown on the
right appears on the unit.
Caution:
Do not disconnect the USB cable whilst transferring
audio data from a PC. Audio data on the unit may
become corrupted.
Note:
The operation buttons on the unit do not work if it is con-
nected to a PC. Disconnect the PC to operate on the unit
(see page 21).
USB cable
Do not
disconnect.
05/4/10 HR-MB3_SEEG_E.fm