Table of Contents
Advertisement
ECN601
LOUDSPEAKER
(1184)
3.2 Assembly/Panel Removal
3.2.1 Stand removal
Notes: Figures below can deviate slightly from the actual situation due to the different set executions.
1.
Remove the fixation screws [1] that secure the stand.
2.
Take the stand bracket out from the set.
1
1
3.2.2 Rear Cover
Warning: Disconnect the mains power cord before removing the rear cover.
24" series
1.
Remove the fixation screws [2] & [3] that secure the stand.
2.
Unplug connector [4] carefully, as the speaker is catch on back cover.
3.
Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
ECN401 to key&IR
Back cover overview (32" & 43" 5505/5545 series)
ECN401
LOUDSPEAKER
(1184)
IR/LED BOARD
J
ECN601
(1056)
ECN401
KEY BOARD
E
(1057)
1
1
1
Advertisement
Table of Contents
