Canon Pro9000 Mark II Service Manual page 25

Hide thumbs Also See for Pro9000 Mark II:

Pro9000 Mark II --- 3. REPAIR

3-2. Part Replacement Procedures

Be sure to protect the printer from static electricity in repair servicing, especially for the logic board and

panel board.

(1) External housing removal

1) Remove the side covers L and R. (no screw)

Release the tabs on the top, then slide the covers downward.

2) Remove the front covers L and R. (no screw)

Release the tabs at the top, then slide the covers upward.

(Click on the image to enlarge it.)

22 / 56

TABLE OF CONTENTS