Canon Pro9000 Mark II Service Manual page 15

continuable)
Front tray in the
raised position
(print NOT
continuable)
Front tray in the
lowered position
(print NOT
continuable)
11 times Failed in
automatic print
head alignment
Paper size
smaller than
specified
12 times Paper not set
properly in the
front tray, or
non-supported
size of paper set
in the front tray
13 times The remaining
ink amount
unknown (raw
ink present).
the front tray is in the lowered
position at the start of printing
from the front tray.)
[1283] --- Lower the front tray, and press
the Resume/Cancel button.
(The error is indicated when
the front tray is raised position
during printing from the rear
tray.)
[1284] --- Raise the front tray, and press
the Resume/Cancel button.
(The error is indicated when
the front tray is lowered during
printing from the front tray.)
[2500] --- Press the Resume/Cancel
button to clear the error, then
perform the automatic print
head alignment again.
[1062] --- Press the Resume/Cancel
button. (The paper will be
ejected, and the print job will
be cancelled automatically.)
The error is indicated when the
size of paper actually set is
smaller than the one selected in
the printer driver, to prevent
printing on the platen.
(e.g. When A4 paper is set in
the printer though A3 is
selected in the printer driver,
the error occurs. If A3 paper is
set in the printer and A4 is
selected in the printer driver,
then the error does not occur.)
[1321] --- Press the Resume/Cancel
button to clear the error, then
set a supported size of paper
properly in the front tray.
[1683] U130 An ink tank which has once
been empty is installed.
Replace the applicable ink tank
with a new one. Printing with a
once-empty ink tank can
damage the printer.
To continue printing without
12 / 56
- Print head
- Ink tank
- Carriage unit
- Logic board
- Carriage unit
- Logic board
- Platen unit
- Feed roller
- Paper feed motor
- Ink tank
- Logic board
- Carriage unit