Canon Color imageCLASS MF8450c Starter Manual page 8

2 Set Up the Machine
5
Place the toner cartridge on a flat surface, fold
back the tab of the sealing tape (A) located at
left side of the toner cartridge.
6
Remove the sealing tape (approx. 18 7/8 inch
long) gently by hooking your finger into the tab
and pulling it out straight in the direction of the
arrow.
–
If the sealing tape is pulled out forcefully or stopped at
midpoint, toner may spill out. If the toner gets into your
eyes or mouth, wash them immediately with cold water
and immediately consult a physician.
–
If toner is adhered to the removed seal, be careful not to
dirty your hands or clothing by touching it.
–
If your hands or clothes get dirty from touching the toner,
wash them immediately in cold water. Do not use hot
water. Doing so may cause the toner to set permanently.
7
Hook your finger into the tab and remove the
packing material (A) located at right side of the
toner cartridge.
6
8
Hold the toner cartridge properly by the blue
tabs on the both sides with the arrowed side
facing up.
Do not hold the toner cartridge in a manner that is not
described in this procedure.
9
Align the guides (A) of the toner cartridge that
you want to replace with the slots (B) to which
the label of the same color is attached, then
insert the cartridge until it stops.