Canon Color imageCLASS MF8450c Starter Manual page 33

8
Make sure the following screen is displayed on
the display, then press [OK] to print the second
test page.
9
Place the second test print on the platen glass.
Place the test print face down on the platen glass, with the
black bands along the top left edge of the platen glass.
Stack approximately 20 sheets of blank paper on top of the
test print for a more precise gradation correction.
10
Make sure the following screen is displayed
on the display, then press
perform the correction.
11
Remove the second print from the platen
glass.
(Start) to
12
Make sure the following screen is displayed
on the display.
In the next setting, you will set the network connection. If
you do not set the network connection, select <Set or Check
Later>, then go to "Finish 'Setup Guide' , " p. 35.
2 Set Up the Machine
31