Connect Power Cord And Turn On The Machine - Canon Color imageCLASS MF8450c Starter Manual

Connect Power Cord and Turn on the Machine

1
Connect the power cord to the rear socket on
the back side of the machine and to the wall
outlet, and press the [I] side of the main power
switch (A) to ON.
–
Make sure all shipping tape/packing materials on the
machine and tabs/tape on the toner cartridges have been
removed.
–
Do not connect the machine and the computer with a
USB cable at this time. Connect the machine and the
computer with a USB cable only during the software
installation procedure. (A USB cable is not used when the
machine is used via a network connection.)
–
If you want to use the optional paper drawer, connect the
Cassette Feeding Unit-AC1 to the machine before turning
on the machine. (For instructions on how to connect the
Cassette Feeding Unit-AC1, see "Cassette Feeding Unit-
AC1 Setup Instruction. " )
2
The "Setup Guide" automatically appears on the
display.
<Close the front cover.> is displayed:
●
Make sure that the front cover is closed properly. (See "Install Toner Cartridges, "
on p. 4.)
<Set Toner Cartridge Again> is displayed:
●
Make sure that the tabs are removed from the toner cartridges and toner
cartridges are properly installed to the machine. (See "Install Toner Cartridges, "
on p. 4.)
2 Set Up the Machine
9