Aeb With The Iso Speed - Canon EOS-1Ds Instruction Manual

Standard Decreased Increased
exposure exposure exposure

AEB with the ISO Speed

In any shooting mode (< >, <
aperture and change the ISO speed automatically for AEB.
AEB amount AEB range
Take the pictures.
3
s
The AEB sequence will be standard exposure,
decreased exposure, and increased exposure.
s
The viewfinder's exposure level indicator will
indicate the respective bracketing amount as each
shot is taken.
s
The current drive mode will be used. (→p.99)
•
In the continuous shooting mode, holding down the
shutter button will take all three bracketed shots
continuously. The shooting will then stop automati-
cally.
•
When AEB is used with the self-timer, the three
bracketed shots will be taken in succession after the
2- or 10-second self-timer delay.
>, < >, < >, etc.), you can use a fixed shutter speed and
Press the <
1
button simultaneously.
s The ISO speed can now be set.
•
Set the ISO speed that is to be the standard AEB
exposure. (→p.49) For example, if you want AEB
with ISO 200, 400, and 800, set the ISO speed to
400.
Turn the <
2
AEB amount.
s
On the top LCD panel, the AEB amount will be
indicated in stops and the AEB range < > will be
displayed.
The illustration on the left shows an AEB amount of
+/-1 stop centering on the standard exposure level.
•
After setting the AEB amount, let go of the <
button and <
s
The AEB range will be displayed on the top LCD
panel.
Auto Exposure Bracketing
> button and <
> dial to set the desired
> button.
5
>
>
95