Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZGG62411XA
Summary of Contents for Zanussi ZGG62411XA
- Page 1 Wugt"ocpwcn ¥II84633...
-
Page 2: Table Of Contents
• Cleaning and user maintenance shall not be made by children without supervision. General Safety • The appliance and its accessible parts become hot during use. Do not touch the heating elements. • Do not operate the appliance by means of an external timer or separate remote-control system. www.zanussi.com... -
Page 3: Safety Instructions
3 mm. Electrical connection • Use only correct isolation devices: line pro- tecting cut-outs, fuses (screw type fuses re- www.zanussi.com... - Page 4 • Do not put flammable products or items that • Clean the appliance with a moist soft cloth. are wet with flammable products in, near or Only use neutral detergents. Do not use on the appliance. abrasive products, abrasive cleaning pads, solvents or metal objects. www.zanussi.com...
-
Page 5: Product Description
Manufacturer decline any responsibility in case misuse of the flame If after some tries the burner does not light, check if the crown and its cap are in Always light the burner before you put correct positions. cookware. To light the burner: www.zanussi.com... -
Page 6: Helpful Hints And Tips
If the control knobs are under the Warning! Do not use a flame diffuser. bottoms of pots, the flame heats them up. Do not put the same pan on two burners. www.zanussi.com... -
Page 7: Care And Cleaning
If necessary, remove stubborn stains Periodically speak your local Service Force using a paste cleaner. Centre to check the conditions of the gas sup- • Make sure you position the pan supports ply pipe and the pressure adjuster, if fitted. correctly after cleaning. www.zanussi.com... -
Page 8: Troubleshooting
The gas ring burns unevenly • Burner crown is blocked with • Make sure that the injector is food residues not blocked and the burner crown is clear of food particles. www.zanussi.com... -
Page 9: Installation
Also be compliance with standards and local careful when the hob is put together with an regulations in force. oven. www.zanussi.com... - Page 10 (or natural gas G20 13 mbar ) to liquid gas, – expired term is not due. fully tighten the by-pass screw in. If one or more defects are visible, do not repair the pipe, but replace it. 1) only for Russia www.zanussi.com...
- Page 11 "N" on it. Con- nect the brown (or black) phase cable to the terminal which has a letter "L". Keep the phase cable connected at all times. a) Removable panel b) Space for connections www.zanussi.com...
-
Page 12: Technical Information
Gas supply: G20 (2H) 20 mbar Appliance class: By-pass diameters Burner Ø By-pass in 1/100 Burner Ø By-pass in 1/100 Auxiliary Rapid Semi-rapid Gas burners for NATURAL GAS G20 20 mbar BURNER NORMAL POWER kW inj. 1/100 mm Auxiliary Semi-rapid www.zanussi.com... -
Page 13: Environment Concerns
>PE<,>PS<, etc. Discard the packaging mate- otherwise be caused by inappropriate waste rials as household waste at the waste disposal handling of this product. For more detailed facilities in your municipality. www.zanussi.com... - Page 14 _ _ _ _ _ _ 18 _ _ _ _ _ _ _ _ _ _ 25 _ _ _ _ _ _ _ _ _ _ _ _ 19 _ _ _ _ _ _ 27 • • • • • « », www.zanussi.com...
- Page 15 • • • • • • • • • • • • • • • • www.zanussi.com...
- Page 16 • • • • • • • • • • • • • • • • • • • • • • www.zanussi.com...
- Page 17 • • • • • • • • • • • • • • • • • • • • • • • • www.zanussi.com...
- Page 18 • • • " " « ». www.zanussi.com...
- Page 19 " " « » « ». 120 - 220 80 - 160 • • 160 - 260 www.zanussi.com...
- Page 20 • « ». • • • • • • 1. – • – www.zanussi.com...
- Page 21 • • • • • • • www.zanussi.com...
- Page 22 • ....• (PNC) ....• (S.N.) ....MOD. MOD. MOD. TYPE PROD.NO. 230V-50Hz PROD.NO. PROD.NO. SER.NO. IP20 0049 SER.NO SER.NO 03 IT DATA DATA MADE IN ITALY MODEL MODEL « ». www.zanussi.com...
- Page 23 – – G 1/2 « »). – 30°C; – 1500 – – – – – – www.zanussi.com...
- Page 24 • • • • G20 20 • G20 13 • • • 90°C. «N». • «L». • H05V2V2-F T90 • min. 100 mm min. 650 mm min. 55 mm • 30 mm 550 mm www.zanussi.com...
- Page 25 50 cm 120 cm 180 cm 360 cm 30 mm min 20 mm 60 mm (max 150 mm) www.zanussi.com...
- Page 26 G20 (2H) 20 = 8.0 G30/G31 (3B/P) 30/30 = 567 / G20 (2H) 13 = 5.6 ~ 50 II2H3B/P G 1/2" G20 (2H) 20 1/100 1/100 G20 20 . 1/100 G30/G31 30/30 1/100 G20 13 www.zanussi.com...
- Page 27 G20 (2H) 13 . 1/100 ³/ 0.33 0.095 0.45 0.148 0.75 0.201 : >PE< ( ), >PS< ( Ｖｘぐｘ"きぎがうぅｚがあくぐｚｘ"あｘかかがぁが"うぅあぃぉうそ"けえｘぅｘかｘ"ｚ"くぃぎうぇかがお"かがおぃぎぃ *ugtkcn"pwodぃt+."ぁあぃ"きぃぎｚｘそ"ごうげぎｘ"かがおぃぎｘ"くががぐｚぃぐくぐｚけぃぐ"きがくぉぃあかぃぇ ごうげぎぃ"ぁがあｘ"きぎがうぅｚがあくぐｚｘ."ｚぐがぎｘそ"う"ぐぎぃぐずそ"ごうげぎす"椴"きがぎそあえがｚがおけ かがおぃぎけ"かぃあぃぉう0"ｅｘきぎうおぃぎ."くぃぎうぇかすぇ"かがおぃぎ"65234567"がぅかｘさｘぃぐ."さぐが うぅあぃぉうぃ"きぎがうぅｚぃあぃかが"かｘ"ぐぎうあごｘぐがぇ"かぃあぃぉぃ"4236"ぁがあｘ0 ｕぉぃえぐぎがぉぜえく"Ｚぐｘぉうそ"ｉ0き0Ｒ0"ｍｘけくこがぉあ"ｕききぉｘぇぃかくうぅ"/"げｘｙぎうえｘ"ｌがぎぉう Ｔうｘぉぃ"Ｓがぉがかずそ"4;:."K/69322"ｌがぎぉう Ｚぐｘぉうそ www.zanussi.com...
- Page 28 www.zanussi.com/shop...