Blomberg LRI285410W User Manual page 63

Maintenance and cleaning
Discharging the water when the product does not have an emergency draining hose:
a. Place a large container in front of the filter to catch water from the filter.
b. Loosen pump filter (anticlockwise) until water starts to flow. Fill the flowing water
into the container you have placed in front of the filter. Always keep a piece of
cloth handy to absorb any spilled water.
c. When the water inside the machine is finished, take out the filter completely by
turning it.
3. Clean any residues inside the filter as well as fibers, if any, around the pump
impeller region.
4. Install the filter.
5. If the filter cap is composed of two pieces, close the filter cap by pressing on the
tab. If it is one piece, seat the tabs in the lower part into their places first, and
then press the upper part to close.
User's Manual
63 / EN