Related Manuals for Blomberg LRF1854311W
Summary of Contents for Blomberg LRF1854311W
- Page 1 Washer-Dryer User Manual LRF1854311W Document Number : 2820530232_EN/ 26-05-22.(15:47)
- Page 2 PRECAUTION! Dear Customer, • Precautions that need to be taken. Thank you for choosing a Blomberg appliance. Please take some time to read this user manual before using your appliance, to ensure you know INFORMATION how to safely operate the controls and functions.
-
Page 3: Important Instructions For Safety And Environment
1 Important instructions for safety and environment 1.1.1 Electrical safety This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow DANGER! these instructions shall void any warranty. • If the product has a failure, it should 1.1 General safety not be operated unless it is repaired by the Authorised Service Agent. -
Page 4: Product Safety
1.1.2 Product safety INFORMATION DANGER! • Do not install or leave the product in places where it might be exposed to • Never open the loading door or remove outdoor conditions. the filter while there is still water in the •... - Page 5 CAUTION! DANGER! • Do not stop the machine before the • Rubber (latex) foam, shower caps, drying programme is completed. waterproof fabrics, clothes and If you have to do so, remove all rubber-reinforced/rubber-foam laundry, place it at an appropriate pillows must not be dried with the place and wait for it to cool down.
-
Page 6: Intended Use
1.2 Intended use WARNING! INFORMATION • Before loading the machine, check each laundry item and make sure • This product has been designed for that there is no lighter, change, domestic use. It is not suitable for metal objects, needles etc. inside commercial use and it must not be them or in their pockets. -
Page 7: Children's Safety
1.3 Children's safety Help protect the environment and natural resources by recycling used products. For children’s safety, cut the power cable and CAUTION! break the lock mechanism of the loading door to make the product non-functional before • Children under the age of 3 must be disposal. -
Page 8: Package Contents
2.2 Package contents Power cable Water discharge hose Transit bolts Mains water inlet hose Liquid detergent container (*) User manual Plastic plug group INFORMATION • Figures in this manual are schematic and may not match the product exactly. (*) This may be supplied with the machine depending on the model of your product. 8 / EN Washer-Dryer / User Manual... -
Page 9: Technical Specifications
2.3 Technical specifications Supplier name or trademark BLOMBERG LRF1854311W Model name 7178585900 Maximum spin speed (rpm) 1400 Washing capacity (cotton) (kg) Drying capacity (cotton) (kg) Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - •... -
Page 10: Appropriate Installation Location
3 Installation PRECAUTION! INFORMATION • Preparation of the location and electrical, tap water and waste water installations at • Your washing machine automatically the place of installation is under customer’s detects the amount of laundry placed inside responsibility. when selecting a program. •... -
Page 11: Removing The Transit Bolts
3.4 Connecting water supply DANGER! INFORMATION • Your product is heavy. Remove packaging reinforcement as displayed in the figure. • The water supply pressure required to run • Be careful not to get your hand caught the product is between 1 to 10 bars (0.1 under the machine during this procedure. -
Page 12: Connecting To The Drain
do not immerse the hose end into the dirty 3 Open the taps water or do not drive it in the drain more completely after than 15 cm. If it is too long, cut it short. making the hose • The end of the hose should not be connection to bent, it should not be stepped on check for water... -
Page 13: Electrical Connection
3.7 Electrical connection Connect the product to a grounded outlet protected by a 13 A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations. •... -
Page 14: Sorting The Laundry
4 Preparation INFORMATION 4.1 Sorting the laundry • Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. * Sort laundry according to type of intensely must be shaken off before being fabric, colour, degree of soiling and placed into the machine. -
Page 15: Detergent Drawer
To prepare the product for washing laundry, perform first operation in Drum Cleaning INFORMATION programme. If this programme is not available • The loading door is locked while a programme on your machine, apply the method described is running. The door lock will open in section 6.2. -
Page 16: Choosing The Detergent Type
4.7.5 Using softeners • Do not select a programme with prewash if you are using a detergent bag or dispensing Pour the softener into the softener compartment ball. Place the detergent bag or the of the detergent drawer. dispensing ball directly among the laundry •... -
Page 17: Using Laundry Starch
4.7.7 Using gel and tablet detergent 4.7.9 Using bleach • If the gel detergent thickness is fluidal and • Select a programme with prewash and add the your machine does not contain a special bleach at the beginning of the prewash. Do not liquid detergent container, put the gel put detergent in the prewash compartment. -
Page 18: Tips For Efficient Washing
4.8 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended temperature (Recommended temperature range (Recommended temperature range temperature range based range based on soiling level: based on soiling level: 40-90˚C) based on soiling level: cold -40˚C) on soiling level: cold -40˚C) cold -30˚C) Powder and liquid detergents... - Page 19 4.10 Displayed Programme Time You can see the programme duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, foaming, unbalanced load conditions, fluctuations in power supply, water pressure and programme settings, the programme duration is automatically adjusted while the programme is running.
-
Page 20: Operating The Product
5.3 Preparing the Machine 5 Operating the product 1. Check if the hoses are connected tightly. 5.1 Control panel 2. Plug in your machine. 3. Turn the tap on completely. 4. Place the laundry in the machine. 5. Add detergent and fabric softener. 5.4 Selecting a washing programme 1. - Page 21 • Cottons • Hand Wash You can wash your durable cotton laundry Use this programme to wash your woollen (sheets, bedlinen, towels, bathrobes, underwear clothes. Select the appropriate temperature etc.) in this programme. When you press the complying with the tag of your clothes. Your quick wash function key, programme duration laundry will be washed with very delicate becomes notably shorter but effective washing is...
- Page 22 • Fast Full Load / Mini 14’ • Down Wear Use this programme to wash your lightly soiled Use this programme to wash down coats, vests, cotton clothes in a short time. The programme jackets etc. that bear a “machine-washable” tag. duration can be reduced down to 14 minutes Thanks to special spin profiles, it is ensured that when the quick wash function is selected.
-
Page 23: Temperature Selection
• Rinse Use when you want to rinse or starch separately. INFORMATION • Spin+Pump • You can dry your laundry without any Use this programme to drain the water in the interruption right after the washing programme machine. (it is possible to perform automatic or scheduled drying after the washing cycle). - Page 24 5.7 Spin speed selection You can also change the spin speed after the washing cycle has started. After the washing cycle has ended, you can press the spin speed adjustment button to select a spin speed. However, you need to do this before the spinning step begins.
-
Page 25: Washing And Drying Programmes
• 5 kg Wash & Dry Use this programme to wash cotton laundry of INFORMATION up to 5 kg and to dry right after the washing • There is a spinning step in the drying programme without making any other selection. programmes. -
Page 26: Programme And Consumption Table
• Hygiene Refresh INFORMATION Hygienic washing with warm air (program period 58 min.) • Hygiene air refresh program is not a With the hygiene air refresh program, hygienic program where laundry is washed with cleaning with air is ensured by keeping the water. - Page 27 • : Selectable. * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the washing performance test program in accordance with EN 62512 and energy label test program in accordance with Commission Delegated Regulation (EU) 2019/2014 Eco 40-60 with 40 °C temperature and cup board dry selection is the wash and dry cycle test program in accordance with EN 62512 and energy label test program in accordance with Commission Delegated Regulation (EU) 2019/2014 *****: These programmes can be used with the HomeWhiz application.
-
Page 28: Auxiliary Function Selection
Consumption Values (EN) 1400 03:38 0,955 Eco 40-60 1400 02:47 0,550 1400 02:47 0,320 0,600 1400 03:40 Cottons 1400 03:40 1,800 Synthetics 0,850 1200 02:25 Fast Full Load / Mini 14’ 0,200 1400 00:28 3,215 1400 07:55 Eco 40-60+Cupboard Dry 1400 05:50 1,780... -
Page 29: Auxiliary Functions
5.11.1 Auxiliary Functions 5.11.2 Functions/Programmes Selected by Pressing the • Prewash Function Buttons for 3 Seconds A Prewash is required only for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time. • Drum Clean+ • Shorter Wash To select this programme, press and hold the You can press the Quick Wash button to auxiliary function button 1 for 3 seconds. -
Page 30: Drying Steps
To disable Bluetooth: • Steam Press and hold the Remote Control You can press and hold the auxiliary function key function button for 3 seconds. You will see 2 for 3 seconds to select this function. the countdown “3-2-1”, and bluetooth symbol Use this programme to reduce the wrinkles and will be disappear. -
Page 31: Time Based Drying - Minutes
5.12.4 Time based To ensure that the End Time function is enabled and the programme ends at the end of the drying - minutes defined duration, you should press Start / You can select 30, 90 or 150 minutes drying Pause after setting the duration. -
Page 32: Loading Door Lock
5.16 Loading door lock There is a locking system on the loading door of the machine that prevents opening of the loading door when the water level is unsuitable to open the door. "Loading door locked" light on the panel turns on when the loading door is locked. - Page 33 5.17.2 Switching the machine to pause mode INFORMATION • The programme will not be cancelled if you turn the programme selection knob while child lock is enabled. You should cancel the Child Lock first. • If you want to open the loading door after you have cancelled the programme but Press the Start/Pause button to switch the you cannot do it since the water level in the...
- Page 34 Make sure that your smart device is connected • To start the setup process, make sure that your to internet to download the app. machine is switched off. Press and hold the If you are using the app for the first time, please Temperature button and the Remote Control follow the on-screen instructions to complete the Function button simultaneously for 3 seconds to...
-
Page 35: Using The Remote Control Function
automatically. If the paired device goes out of the range, the Bluetooth connection will turn off WARNING! automatically. For this reason, you will need to • For HomeWhiz setup, your smart device must turn on Bluetooth again if you want to use the be connected to internet. -
Page 36: Maintenance And Cleaning
If the Remote Control function cannot be 6 Maintenance and cleaning enabled, you will hear a warning after pressing the button. This might occur if the product is Service life of product extends and frequently switched on or if there is no product paired experienced problems will be reduced if it is through Bluetooth. -
Page 37: Cleaning The Body And Control Panel
1. Close the taps. After every washing and 2. Remove the nuts of the water intake drying make sure that hoses to access the filters on the water no foreign substance is intake valves. Clean residues on them left in the drum. with an appropriate brush. -
Page 38: Troubleshooting
2. Open the filter cover. Press the tab 7 Troubleshooting in the direction of the arrow and pull the cover out towards yourself. Programmes won’t start after the loading door has been closed. • You did not press the Start/Pause/Cancel button.>>> *Press the Start/Pause/Cancel button. - Page 39 Machine directly discharges the water it takes in. Programme time does not countdown. (*) • The drain hose might be at an inappropriate height. >>> • The laundry in the machine might be unbalanced. >>> The Connect the water drain hose as described in the user manual. automatic unbalanced load detection system might have been activated due to uneven distribution of the laundry in the drum.
- Page 40 Colour of the clothes faded. (**) There is detergent left on the laundry. • Machine might have been overloaded. >>> Do not overload • Machine might have been overloaded. >>> Do not overload the machine. the machine. • Detergent used might be damp. >>> Keep detergents closed •...
- Page 41 Machine does not start or programme cannot be started. • Power cable might be unplugged. >>> Make sure that the power cable is plugged in. • Programme might not be set, or the Start/Pause/ Cancel button might not be pressed. >>> Make sure the programme is set and the machine is not in Stand-by mode.
- Page 42 Therefore, please be advised that repairs by professional repairers (who are not authorized by Blomberg) shall void the guarantee. Self-Repair Self-repair can be done by the end-user with regard to the following spare parts: door, door...
- Page 43 Accidental damage, misuse or abuse of a product. An attempted repair of a product by anyone other than a Blomberg Approved Engineer (the “Engineer”). Installation or use of a product where such installation or use fails to meet the requirements contained in this guarantee or the User Instructions Booklet.
- Page 44 11. Optional extras, where available (i.e. extendable feet) are supplied on a chargeable basis only. Does Blomberg offer replacements? This is a repair-only guarantee. On occasion, the Manufacturer may at its sole discretion, replace your product with a new product instead of carrying out a repair. Where a replacement is offered, this would normally be an identical model but when this is not possible, a model of similar specification will be provided.
- Page 45 You can register by first visiting blomberguk.com/register and by following the online instructions. All Blomberg appliances come with a 3 year parts and labour guarantee as standard. When you register your appliance for the Optima Inverter Motor 10 year guarantee, you are also registering your appliance for the standard 3 year parts and labour guarantee.
- Page 46 HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have this documentation available should the product require attention under guarantee. Please take a few moments to complete the details below, as you will need this information when you call us, or to use our online services.