Canon 2541C001 Operation Manual page 219

A135 Invalid upload setting (FTP PORT/
PASV mode) [notice]
Description
Meaning
A136 Invalid upload setting (HTTP
notification only/image mode) [notice]
Description
Meaning
A137 Invalid upload setting (E-mail
notification) [notice]
Description
Meaning
A138 Invalid upload setting (E-mail
notification authentication mode) [notice]
Description
Meaning
A274 Event buffer for upload overflowed
[warning]
Description
Meaning
Countermeasure
A275 Image buffer for upload overflowed
[warning]
Description
Meaning
Countermeasure
218
ftp port/pasv mode invalid. uploader
set <pasv> forcibly (A135)
The PORT/PASV mode setting in
connection with FTP upload is invalid.
The PASV mode was forcibly set.
http notice/image mode invalid.
uploader set <image> forcibly (A136)
The notification only/image mode
setting in connection with HTTP upload
is invalid. The image mode was
forcibly set.
mode invalid. uploader set <none>
forcibly (A137)
The e-mail notification setting is invalid.
Email notification was forcibly
disabled.
authentication mode invalid. uploader
set <smtp auth> forcibly (A138)
The setting for e-mail notification
authentication mode is invalid.
"SMTP_AUTH" was forcibly set.
event queue is full (A274)
Event buffer for upload overflowed.
Make adjustments to reduce the
number of event occurrences.
buffer queue is full (A275)
Image buffer for upload overflowed.
Make adjustments to reduce the
number of event occurrences. Also
adjust the video quality, video size and
frame rate for upload.

Memory card warning
M201 Memory card is write-protected
[warning]
Description Readonly filesystem (M201)
Meaning A write-protected memory card is
inserted.
M203 Not enough space on memory card
[warning]
Description There is not available space (M203)
Meaning Insufficient memory card capacity.
M204 Invalid file removed [warning]
Description Invalid file (%1) was removed. (M204)
%1 Name of removed file
Meaning An invalid file was removed.
M205 Checking management information file
[warning]
Description %1 checking management file (M205)
%1 Start | Finish
Meaning The memory card may have been
removed without being unmounted.
Start/finish checking management
information file.
M206 Invalid management information
removed [warning]
Description Invalid db information(%1)(%2) was
removed(M206)
%1 Name of management information file
containing invalid information
%2 ID of invalid information
Meaning Invalid management information was
removed.
M207 Memory card removed without
unmounting [warning]
Description Memory card was pulled before
unmount. (M207)
Meaning Memory card was removed when
mounted.