Canon 2541C001 Operation Manual page 125

[Always]
Preset tour is always performed.
Note
When [Disable] is selected, the following preset tour route settings cannot be configured.
[Route Name]
Enter the tour route name.
[Specify Active Time]
Select [Specified] to configure a preset tour at a predetermined time, and enter the start time and end time for the
preset tour.
If [Viewers Connected] is set for [Conditions to Enable Settings], the preset tour operates when the Viewer is
connected to the camera at the tour start time. If [Always] is set for [Conditions to Enable Settings], the preset tour
always operates.
[Reverse Route]
If you select [Enable], the preset tour order in [Edit Tour Route] will be reversed.
3 Click [Add] in [Edit Tour Route].
Select a preset to tour from the [Preset List].
4
You can select multiple presets.
HM4x
Note
If the preset position is outside the restrict view area,
5 Click [Add].
The preset is added to the [Edit Tour Route].
Select a preset in [Edit Tour Route] and click the [
If you select a preset in [Edit Tour Route] and then click [Delete], the preset will be deleted.
Select a preset name in the [Preset List] or [Edit Tour Route] list, and click [Preview]. The preset settings can be
checked in the video display area.
124
HM4x
HM4x
(a warning icon) is displayed on the left.
] or [ ] to change its position in the list.