Snmp V1 And V2C Server; Snmp V3 Server; Ftp Server - Canon 2541C001 Operation Manual

[Use SNMP v3]
If you select [Enable], you can use SNMP v3 to browse the camera information from an SNMP manager.
[Administrator Contact Information]
Enter contact information (e-mail address, etc.) for the administrator of the camera. Setting information can be referenced
by the SNMP manager.
[Administration Function Name]
Enter the camera name used for administration. Setting information can be referenced by the SNMP manager.
If left blank, the camera model name will be used.
[Installation Location]
Enter information regarding the installation location of this camera. Setting information can be referenced by the SNMP
manager.

SNMP v1 and v2c Server

[Community Name]
If you select [Enable] for [Use SNMP v1 and v2c], enter the community name to use for SNMPv1 and v2c. The factory
default setting is blank.

SNMP v3 Server

[User Name]
If you selected [Enable] for [Use SNMP v3], set the user name to use with SNMP v3.
[Security Level]
Select the security level to use for SNMP v3.
[Authentication Algorithm]
If you selected [Authentication but no encryption] or [Authentication and encryption] for [Security Level], select the
authentication algorithm.
[Authentication Password]
If you selected [Authentication but no encryption] or [Authentication and encryption] for [Security Level], set the
authentication password.
[Encryption Algorithm]
If you selected [Authentication and encryption] for [Security Level], select the encryption algorithm.
[Encryption Password]
If you selected [Authentication and encryption] for [Security Level], set the encryption password.

FTP Server

[Use FTP Server]
The settings for using an FTP server.
[User Name]
Set the name of the user to allow FTP connections for.
[Password]
Set the password of the user to allow FTP connections for.
Important
• Canon will assume no liability for any accident or damage resulting from use of FTP software.
• When changing the user name, make sure to also change the password.
• If you set the same user name as a user name used in the system, the message "User name is invalid." is displayed. In this case, set
another user name.
5
139