Power
Initiating or Resuming from Standby
Task
Initiate standby.
Allow the system
to initiate
standby.
Resume from
standby.
2–8
Procedure
With the notebook on, use one of
the following procedures:
Press the fn+f5 hotkey.
Close the notebook display.
Select Start > Turn Off
Computer > Stand By.
No action is required. The system
initiates standby
After 10 minutes of inactivity
while running on battery power.
After 25 minutes of inactivity
while running on external
power.
Use one of the following
procedures:
Briefly press the power/standby
button.
Use the TouchPad or press a
TouchPad button.
Press any key on the keyboard.
Open the display if standby
was initiated by closing the
notebook.
Press a button on the optional
remote control (select models
only).
Result
The power/standby
light blinks.
The screen is
cleared.
The power/standby
light blinks.
The screen is
cleared.
The power/standby
light is turned on.
Your work returns to
the screen.
Hardware and Software Guide