QuickLock
The
fn+f6
security feature.
QuickLock protects your notebook by displaying the operating
system log-on screen. While the log-on screen is displayed, the
notebook cannot be accessed until a Windows user password or
Windows administrator password is entered.
Before you can use the QuickLock feature, you must set a
Windows user password or Windows administrator password. For
instructions, refer to the Help and Support Center by selecting
Start > Help and Support.
To initiate QuickLock, press
To exit QuickLock, enter your Windows user password or
Windows administrator password.
Passwords
Most security features use passwords. Whenever you set a
password, write down the password and store it in a secure
location away from the notebook.
If you forget your power-on password and your
HP administrator password, you cannot start up the
notebook or restore from hibernation. Call Customer Care
or your service partner for additional information.
If you forget your HP administrator password, you will not
be able to access the Setup utility.
Hardware and Software Guide
hotkey initiates the operating system QuickLock
fn+f6.
Security
12–3