Restoring Factory Settings In Computer Setup - HP Compaq Presario,Presario CQ42-121 Maintenance And Service Manual
Notebook pc
Hide thumbs
Also See for Compaq Presario,Presario CQ42-121:
- Maintenance and service manual (278 pages) ,
- User manual (239 pages) ,
- Hardware and software manual (223 pages)
Table of Contents
Advertisement
Restoring factory settings in Computer Setup
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select File > Restore Defaults, and then press enter.
3.
When the confirmation dialog box opens, press f10.
4.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes And Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
NOTE:
Your password settings and security settings are not changed when you restore the factory
settings.
ENWW
f10
while the
Computer Setup in Linux 101
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Compaq Presario,Presario CQ42-121 and is the answer not in the manual?
Questions and answers