Timer Function - Sharp KH-3V19NT00-EU User Manual

Timer Function

The timer provides following features:
The control can run max. 4 heater as-
signed timers and the 1minute minder
(which is assigned to no heater) simul-
taneously.
All timers can be only used in B mode. A
heater timer can only be assigned to a
active heater, running in levels between
1-9. The minute minder is independent
of any heater.
In order to use both functions, the timer
function must be activated by the ac-
tive/deactivated timer button
Touching for the fist time after acti-
vating the heaters, the control proposes
the minute minder (no cooking zone in-
dicator is flashing, they are all on or off).
Touching for the second time, the
control proposes the assignment to
one of the activated heaters by flashing
cooking zone indicator. Now the timer
to the linked timer signalised.
Touching again, the next timer in the
clockwise direction, is proposed for as-
signment of the next active heater. And
so on...
Minute Minder
No matter whether a heater is active or
not, the minute minder can be operated
by touching . The ´00`that displays
shows that timer is active and the dot in
the right timer display indicates that
and are now linked for setting the
timer value.
The minute minder is selected when all
cooking zone indicators are statically
on or off (no cooking zone indicator is
flashing).
Use
After successfully setting of the minute
minder time, the timer starts to count
down the time.
The minute minder will not be stopped
by switching off the appliance or activat-
ing the key lock function. It will proceed
by increasing the minutes until it has
finished counting down the minutes.
.
After the timer has reached ´00` of , the
buzzer indicates that time is up.
To stop the buzzer, you have to confirm
that time is up by touching any button.
Heater timer
Heater timers can only be set for acti-
vated heaters (heater level must be set
between 1-9)
Touching
minder. Touching
assigns the timer to the activated heat-
er. The proposed assignment is indicat-
ed by the related cooking zone indicator
that is flashing.
Touching
first heater timer, the control will recom-
mend the next active heater assigned
to the timer in the clockwise direction.
The assignment recommendation is
indicated by the flashing cooking zone
indicator.
EN -12-
and to set the timer value.
once activates the minute
the second time
again after activating the