Download Print this page

Sharp NTT docomo Aquos Pad Instruction Manual page 12

Advertisement

When using a DC adapter
The DC adapter should only be used in negative grounded
vehicles (12 and 24V DC).
Do not use with the car engine shut off. May drain the car
battery.
The DC adapter fuse is a consumable product. For
replacement, purchase a new fuse at a nearest auto parts
retailer etc.
Refer to the user's guide of DC Adapter 03/04 for details.
Charging with Micro USB Cable 01
You can charge the tablet by connecting the tablet to a PC with
Micro USB Cable 01 (sold separately).
For details on connecting to a PC nP. 79 "Connecting the
tablet and PC"
Turning power on/off
Turning power on
1
H (for at least 2 seconds)
: When you turn the power on for the first time, make the initial
settings (nP. 22 "Initial setting").
Precautions about inserting and removing a microSD Card are
displayed every time the tablet power is turned on.
Turning power off
1
H (for at least 1 second)/[Power off
completely]/[OK]
Turning power off forcibly
You can forcibly turn the power off if the screen does not respond or
the power cannot be turned off.
1
H (for at least 8 seconds)
: Release your finger after the vibrator is activated to turn the
power off.
Sleep mode
You can quickly activate the tablet when turning the power on again
by setting the sleep mode.
1
H (for at least 1 second)/[To sleep]/[OK]
Do not set the sleep mode but turn the power off when an
airplane you are aboard is about to take off/land, the battery
level is low, etc.
Even if you set the sleep mode, the tablet may not be quickly
activated depending on its status such as when it has not been
used for a long time.
Turning display on/off
The display is turned off when H is pressed or the tablet is not in
use for a set length of time.
Press H while the display is turned off to turn it on.
Touch panel lock
When the power or the display is turned on, the touch panel is
locked.
Touch [J] to unlock.
Widget
Operations in touch panel lock screen
To set/disable the manner mode: y (for at least 2 seconds)
To turn on/off the mobile light: x (for at least 2 seconds)
To activate SH Camera: [K]
To activate しゃべってコンシェル (Shabette-Concier)/Google:
[W]/select an app/select an activation method
To add a widget: Slide the left edge of the screen to the
[+]/select a widget
・ To move a widget: Slide the left edge of the screen to the
right/touch and hold a widget/drag it to the destination
・ To delete a widget: Slide the left edge of the screen to the
right/touch and hold a widget/drag it to [Remove]
The status panel can be displayed without disabling the lock
when Screen lock is set to [Slide or Touch].
Mobile light
The mobile light may be automatically turned off if you use the
tablet for a long time or the tablet becomes warm after the
mobile light is turned on. Also, you may not be able to use the
mobile light if the tablet is warm.
Adding widgets
Enable [Enable widgets] in advance (nP. 67 "Lock &
security").
Unlock the touch panel after you touch [+] when Screen lock is
set to an item other than [Slide or Touch].
Basic operation
Basic operations of the tablet such as operations of the touch
panel and navigation keys, and operations for shooting
screenshot are explained here.
Operation of touch panel
The followings describe the operations to use the display
(touch panel).
Operations may differ depending on the function and screen in
use.
To use Stylus Pen SH02 (sold separately), enable [Using the fine
point pen.] in advance (nP. 65 "Useful").
16
right/
Before Using the Tablet

Advertisement

loading

This manual is also suitable for:

Ntt docomo sh-06fNtt docomo hro00208