Getting Started; Hooking Up The Connection Cable; Connecting The Led - Panasonic ANUJ5010 User Manual

5 Getting Started

After connecting the necessary cords, lastly plug in the power cord. This section describes the steps
up to turning on the power.

5.1 Hooking up the Connection Cable

5.2 Connecting the LED

Connecting the head
12
Remove the caps on the connection-cable terminals, and hook up the
cables.
LED 1
LED 2
LED 3
LED 4
Note: Cable labels are affixed to the main unit. Please use them if you
want to identify the cables.
Plug the female side of the connection cable into the main unit.
Warning
Plugging in the wrong side (the male connector) could bend the
connector pins or cause other issues.
White
Red
Blue
Green