Connecting To The Jacks On The Front Panel - Yamaha Aventage MusicCast RX-A1070BL Owner's Manual

Connecting to the jacks on the front panel

Use the VIDEO AUX jack to temporarily connect a playback device to the unit.
Use the USB jack to connect a USB storage device. For details, see "Connecting a USB storage
device" (p.82).
Before making a connection, stop playback on the device and turn down the volume on the
unit.
■ HDMI connection
Connect an HDMI-compatible device (such as game consoles and camcorders) to the unit with
an HDMI cable.
ENTER
ZONE 2
RETURN DISPLAY
PHONES
USB
5V 1A
YPAO MIC SILENT CINEMA
The unit (front)
Game console
Camcorder
If you select "VIDEO AUX" as the input source by pressing V-AUX on the remote control, the
video/audio played back on the device will be output from the unit.
Y
• You need to prepare an HDMI cable that matches the output jacks on your device.
• The VIDEO AUX (HDMI IN) jack does not support HDCP 2.2.
ZONE CONTROL
VIDEO AUX
L AUDIO R
HDMI IN
■ Analog stereo connection
Connect an audio playback device (such as CD players) to the unit with a stereo pin cable.
ENTER
RETURN DISPLAY
USB
5V 1A
The unit (front)
Audio device
If you select "VIDEO AUX" as the input source by pressing V-AUX, the audio played back on the
device will be output from the unit.
X
• If you connect devices to both the VIDEO AUX (HDMI IN) jack and VIDEO AUX (AUDIO) jacks, the unit outputs
audio input through the VIDEO AUX (HDMI IN) jack.
• If you connect video devices to both the VIDEO AUX (HDMI IN) jack and VIDEO AUX (AUDIO) jacks, the unit
outputs video/audio input through the VIDEO AUX (HDMI IN) jack.
37
En
ZONE 2 ZONE CONTROL
PHONES VIDEO AUX
L AUDIO R
YPAO MIC SILENT CINEMA HDMI IN