RX-V683/RX-A770
Note:
When the DIGITAL P.C.B. or IC82 on DIGITAL P.C.B. is replaced, this unit will display "Internal Error" and will
not operate properly. The model name and serial number MUST be written to the backup IC (EEPROM: IC82 on
DIGITAL (1) P.C.B.) to have proper operation. (For detailed procedure, refer to related Service News or Service
Bulletin. Or contact your local Yamaha representative.)
注意:
DIGITAL P.C.B. または DIGITAL P.C.B. の IC82 を交換すると、"Internal Error" が表示されて本機が正常に動作しなく
なります。正常に動作させるために、モデル名とシリアル番号をバックアップ IC(EEPROM:DIGITAL (1) P.C.B. の
IC82)へ書き込む必要があります。 (詳しい手順は、関連するサービスニュース、または技術報告を参照してくださ
い。もしくはヤマハのサービスセンターまでご連絡ください)
■ CONTENTS
FRONT PANELS ............................................................ 3
REAR PANELS .............................................................. 5
INTERNAL VIEW ......................................................... 17
UPDATING FIRMWARE /
ダイアグ(自己診断機能) .......................................... 33
パワーアンプ調整 ...................................................... 81
1 0 1 3 9 0
AV RECEIVER
SERVICE MANUAL
DISPLAY DATA ............................................................ 82
IC DATA ........................................................................ 85
BLOCK DIAGRAMS ..................................................... 94
ファームウェア更新手順 .......................................... 189
'17.05
Need help?
Do you have a question about the RX-V683 and is the answer not in the manual?
Questions and answers