Yamaha Aventage MusicCast RX-A1070BL Owner's Manual page 107

Item
Input Trim
Corrects volume differences between input sources.
(In.Trim)
Input Settings Audio Select Selects the audio input jack to use when more than one
(Input Settings) (A.Sel) audio connection is made for one input source.
Video Out
Selects a video to be output with the audio input source.
(V.Out)
FM Mode Switches between stereo and monaural for FM radio
(FM Mode) reception.
(Australia, U.K., Europe and Russia models only)
Init Scan
(Init Scan)
Performs an initial scan for DAB radio reception.
(Australia, U.K., Europe and Russia models only)
Tune AID
(Tune AID)
Checks reception strength of each DAB channel label.
Shuffle Configures the shuffle setting for the USB storage device
(Shuffle) (p.84) or media server (p.88).
Repeat Configures the repeat setting for the USB storage device
(Repeat) (p.84) or media server (p.88).
■ Tone Control (Tone Control)
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to 0.0 dB to +6.0 dB, *0.5 dB increments
Y
• When both "Treble" and "Bass" are 0.0 dB, "Bypass" appears.
• If you set an extreme value, sounds may not match those from other channels.
X
You can also adjust the "Tone Control" setting with the front panel controls by pressing TONE CONTROL
repeatedly to select "Treble" or "Bass", and PROGRAM to make an adjustment.
Function Page
109
109
110
110
72
74
-
-
107
En
■ YPAO Volume (YPAO Volume)
Enables/disables YPAO Volume or Adaptive DRC.
YPAO Volume (YPAO Vol.)
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and low-frequency
levels are automatically adjusted according to the volume so that you can enjoy natural
sounds even at low volume.
Settings
Off (Off) Disables YPAO Volume.
On (On) Enables YPAO Volume.
X
• YPAO Volume works effectively after the measurement results of "Auto Setup" have been already saved (p.43).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower volumes or at
night.
Adaptive DRC (A.DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when
the volume level is adjusted. When it is set to "On", it is useful for listening to playback at a low
volume at night.
Settings
Off (Off) The dynamic range is not automatically adjusted.
On (On) Automatically adjusts the dynamic range when YPAO Volume is enabled.
If "On" is selected, the dynamic range becomes narrow at a low volume and wide at a high
volume.
Volume: low Volume: high
On
On
Off
Off
Input level Input level