Battery Low; Menu Options - DeWalt DCT418S1 Instruction Manual

BATTERY LOW

If the 12V Max* battery pack is about to run out of charge, the
following error message will appear:
Replace or recharge the 12V Max* battery pack.
LOST CONTACT WITH THE WALL SURFACE
If the hand-held radar scanner loses contact with the wall surface, the
following error message will appear:
Remove the hand-held radar scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held radar scanner on the wall to restart the scan.
MAXIMUM DISTANCE EXCEEDED
The hand-held radar scanner has a maximum scanning range of
9.8 feet (3 meters). If the distance scanned exceeds the maximum
distance, the following error message will appear:
Remove the hand-held radar scanner from the wall.
When the "Begin Scanning" screen appears on the display, place the
hand-held radar scanner on the wall to restart the scan.

Menu Options

Press the menu button (K) to view the menu options.
NOTE: At any time, the menu button may be pressed to navigate up
one level.
1. Press the right/down arrow button (J) or left/up arrow button (H) to
highlight the menu option.
2. Press the OK button (I) to confirm selection.
15