Connecting To Cabinets; Recommended Number Of Devices For Connection For Each Input Voltage - Samsung IFH Series User Manual

Table of Contents

Advertisement

Connecting to cabinets

― Connect SNOW-1703U to an external device, and then connect it to IFH or IFH-D devices.
― Connecting parts may differ in different products.
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
Before connecting power to the cabinets, connect the I/G card to the cabinets first.
One SNOW-1703U supports only one type of LED pitch cabinets. Do not connect different
types of LED pitch cabinets.
― Connecting other types of cabinets may cause abnormal image quality.
After connecting the HDBT cable, connect the OCM cable in the following order:
SNOW-1703U
I/G Card
HDBT OUT
HDBT IN
DATA IN (Reverse)
DATA OUT (Forward)
Use a cable of CAT 6 (*FTP type) or higher.
*FTP: Foiled Twisted Pair
― Make sure that the HDBT cable length is from 15 m to 100 m.
― If you use a cable that is out of specified length range, the signal quality may be unstable.
Use the LAN cables recommended on the HDBaseT website (http://hdbaset.org/hdbaset-
recommended-cables).
― If a LAN cable that is not recommended is used, the HDBT signals may become unstable.
First cabinet
Last cabinet
DATA IN
DATA OUT
DATA IN
Connecting cables for redundancy
Recommended number of devices for connection for
each input voltage
Exceeding the recommended maximum number of devices may produce overvoltage, causing
the circuit breaker to trip down or the product to be damaged. Make sure that the number of
connected devices does not exceed the recommended maximum number.
Samsung Electronics is not liable for any problems incurred by connecting devices that exceed
the recommended maximum number.
Model Name
IFH (IF015H / IF020H)
IFH-D (IF025H-D / IF040H-D / IF060H-D)
DATA OUT
IFH (IF025H)
e.g. IFH-D
First cabinet
POWER IN
Operating
Recommended
voltage
maximum number of
connections
110 V
3 or less
220 V
4 or less
110 V
4 or less
220 V
8 or less
Second cabinet
POWER OUT
POWER IN
POWER OUT
Third cabinet
POWER IN
POWER OUT
Do not use
30

Advertisement

Table of Contents
loading

Table of Contents