Table of Contents
Advertisement
Picture and sound setup
B B efore you begin:
You must set Home in Location.
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
Press
and use
to select Setup then press OK.
2
Use
to select Picture and sound setup, then press OK.
3
Follow steps 7 to 8 in Initial setup
TV settings
Picture
Before you begin:
You must set Home in Location.
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
Press
and use
to select Setup then press OK.
2
Use
to select TV settings, then press OK.
3
Use
to select Picture, then press OK.
Auto picture
Picture
Backlight
Sound
Contrast
Features
Installation
Brightness
Accessibility
Color
Tint
Sharpness
Pixel Precise Ultra HD
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
4
Use
to select the item you want to adjust, then press OK.
The following picture settings can be configured. Depending on the
format of the picture source, some picture settings are not available.
To set your TV to a predefined picture setting.
Personal
DOLBY VISION
Bright
DOLBY VISION
Dark
Standard
Natural
Auto picture
Vivid
Sports
Movie
Game
Energy saving
Internet video
p. 35
p. 21
p. 35
The customized settings you
defined using the Picture menu.
When receiving Dolby Vision video
signal, the unit is set to a picture
quality suitable for viewing in a
bright environment.
When receiving Dolby Vision video
signal, the unit is set to a picture
quality suitable for viewing in a dark
environment.
For normal TV viewing.
Ideal picture mode for viewing high
quality content without any picture
enhancements.
Enhanced picture contrast and
sharpness for viewing in a well-lit
room.
Brilliant picture settings for high
action.
Deep picture settings for a
cinematic experience.
Optimized for PCs and game
consoles.
Eco TV settings for low power
consumption.
Optimized for low bit-rate internet
video.
When you adjust the following settings, Personal picture will be set
automatically.
Cursor
To reduce power
Backlight
consumption and
brightness
To decrease contrast
Contrast
Brightness
To decrease brightness To increase brightness
To decrease color
Color
intensity
Tint
To add green
To soften
Sharpness
Enters sub-menus to adjust the following settings:
(Dynamic contrast, Color enhancement, Black
Pixel Precise Ultra
stretch, 120 PMR, 4K UHD Upscaling, Macro
HD
Dimming, Noise reduction and MPEG artifact
reduction)
Enters sub-menus to adjust the following settings:
(Color alignment, Custom color management,
Advanced settings
Gamma, Blue stretch and Film mode)
Automatic
Super zoom
4:3
Movie expand 14:9
Picture format
Movie expand 16:9
Wide screen
Full
Unscaled
PC
Mode selection
HDTV
Cursor
Horizontal position To move PC screen left To move PC screen right
To move PC screen
Vertical position
down
Off
Dolby Vision
Notification
On
Note(s)
•
The auto picture modes - DOLBY VISION Bright and DOLBY VISION Dark are available only
when Dolby Vision content is being played back.
31
.
English
Cursor
To increase power
consumption and
brightness
To increase contrast
To increase color
intensity
To add red
To sharpen
Changing Picture
p. 24
format
To turn off image
enhancement features
which makes the TV to
act purely as a monitor
To enable image
enhancement features
to improve picture
quality
Cursor
To move PC screen up
To set Dolby Vision
Notification to off
To set Dolby Vision
Notification to on
Continued on next page.
Advertisement
Table of Contents
