Contents Important safety instructions Hearing Safety General information 2 Your Wireless headphones What's in the box Overview of your wireless headphones 3 Get started Charge the headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a mobile phone Manage your calls and music Pair the headphones to the...
Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat Hearing Safety Do not drop your headphones. Headphones shall not be exposed to dripping or splashing. Do not allow your headphones to be submerged in water.
2 Your Wireless headphones Congratulations on your purchase, and USB Type-C charging cable product at www.philips.com/support. With this Philips headphones, you can: • Enjoy convenient wireless TV show; • Enjoy and control wireless music. Cloth ear pad (1 pair) What's in the box...
3 Get started Pair the headphones with your mobile phone Before using the headphones with your Charge the headphones with the mobile phone. A successful pairing establishes a unique encrypted link between the headset and the mobile phone. Note Charge the headphones with the supplied USB Make sure that the mobile phone is Type-C cable for two hours for optimum turned on and its Bluetooth feature...
4 Use your Music control Operation Task Button headphones Play or Press once pause music Volume Up Press once Volume Down Press once Connect the headphones Next track Press and to a mobile phone hold 2s Previous track Press and Turn on your mobile phone.
Switch the headphones connection between Pair the headphones to dongle and mobile phone: the dongle transmitter Make sure the headphones has paired the dongle and mobile phone individually. Plug the dongle to the USB jack of TV or PC. Press the “D/M” button on the headphones Press and hold the “PAIR”...
Use on PC Ear cushion replace Plug the dongle to a USB port from PC. When the dongle and headphones are paired, press the “PAIR” button 1x on the dongle to select USB mode. The LED will steady blue on the dongle. Now you can listen the PC sound on the headphones.
AVRCP (Audio Video Remote Control Prole) Supported audio codec: SBC Frequency range: 2.402-2.480 GHz Transmitter power: < 10 dBm Operating range(paired with mobile phone): Up to 10 meters (33 feet) Type-C USB port for charging Supports SBC For further product support, please visit www.philips.com/support.
If there is no collection/recycling system other relevant provisions of Directive for electronic products in your country, you can protect the environment by of Conformity on www.p4c.philips.com. removing and recycling the battery before disposing the headphones. Disposal of your old •...
television reception, which can be Environmental information and on, the user is encouraged to try to All unnecessary packaging has been correct the interference by one or more omitted. We have tried to make the of the following measures: packaging easy to separate into three materials: cardboard (box), polystyrene Reorient or relocate the receiving antenna.
Trademarks Bluetooth The Bluetooth word mark and logos ® are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Top Victory Investment Limited is under license. Other trademarks and trade names are those of their respec- tive owners.
Pairing may have been reset or the headset has been previously paired with another device. Pair the headset with the Bluetooth device again as described in the user manual. (see ‘Pair the time’ on page 5). For further support, visit www.philips.com/support.
Page 15
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Limited is the warrantor in relation to this product.