Mitsubishi Electric Lossnay LGH-RX5-E Series Manual page 17

4.6.2 City Multi and Lossnay Interlocked System
Characteristics
● It is possible to interlock City Multi indoor units with Lossnay operation.
● Independent Lossnay operation can also be performed using MA remote controller or ME remote controller.
● Non M-NET Lossnay remote controller PZ-60DR-E can be used with any Lossnay units in this application.
System Examples
The following groups can be configured.
Single Refrigerant System
Outdoor unit (051)
Lossnay
Indoor Indoor
unit (002) unit
(001) (003)
MA Remote MA Remote
controller controller
Group1 Group2
Group 1 : One Lossnay unit is interlocked to one indoor unit.
Group 2 : One Lossnay unit is interlocked to multiple indoor units.
Group 3 : One indoor unit with two remote controllers is interlocked to one Lossnay unit.
Group 4, 5 : Multiple groups are interlocked to one Lossnay unit.
Multiple Refrigerant Systems
Refrigerant 1
Outdoor unit (051)
Indoor
unit
(001)
MA Remote
controller
Group1
Group 1 : One Lossnay unit is interlocked to one indoor unit.
Group 2 : One Lossnay unit is interlocked to multiple indoor units (with different refrigerants).
Group 3 : One Lossnay unit is interlocked to multiple indoor units (with same refrigerant).
Non M-NET Lossnay remote controller PZ-41SLB-E
cannot be used with any group in this application.
Lossnay
Indoor Indoor
unit (005) unit
(006)
(004)
Group3
Lossnay Indoor Lossnay
(002) unit (004)
(003)
MA Remote
controller
Group2
Lossnay
Indoor
(007) unit
(008)
MA Remote
MA Remote
controller
controller
Group4
Refrigerant 2
Outdoor unit (055)
Indoor Indoor
unit unit
(005) (006)
MA Remote
controller
Group3
( ) address
Lossnay
Indoor
(009) unit
(010)
MA Remote
controller
Group5
( ) address
Indoor Lossnay
unit (008)
(007)
・・・Group setting
Interlocked
・・・
operation setting
・・・Group setting
Interlocked
・・・
operation setting
C-17