Table of Contents
Advertisement
CONFIGURATIONS > Configuring the unit's settings by operation of the body front panel (Front Display menu)
3
Select "Execute".
In process, "Executing" is displayed on the front display. And "Restore Executing" is displayed on the TV.
When the process finishes, "Complete" is displayed ("Restore Complete" on the TV). The unit will restart
automatically a few seconds later.
If "Error" appears on the front display ("Restore Failed" on the TV), check the following and start the process
again.
Check that the file is stored in the route of the USB flash drive.
(
NOTE
"Restore" is effective after backing up all the settings.
(
Do not turn off the unit during the restoring process. Otherwise, the settings may not be restored correctly.
(
You can also restore all the settings in "Backup/Restore" in the "Setup" menu.
(
Related links
"Basic operation of the Front Display menu" (p.286)
299
Advertisement
Table of Contents
