Table of Contents
Advertisement
CONFIGURATIONS > Configuring various functions (Setup menu)
Setting the equalizer
Selects the type of equalizer to adjust the tone.
Setup menu
"Speaker" > "Equalizer" > "EQ Select"
Settings
GEQ
YPAO:Flat
YPAO:Front
YPAO:Natural
Off
When selecting "GEQ"
1
Select "Channel" and then select the desired speaker channel.
2
Select the desired band (frequency) and adjust the gain.
Setting range
-6.0 dB to +6.0 dB
3
Press SETUP.
This completes the settings.
NOTE
Test tone output helps you to adjust the equalizer while confirming its effect
(
"YPAO:Flat", "YPAO:Front", and "YPAO:Natural" are available only when the YPAO has been performed.
(
Related links
"Outputting test tones" (p.203)
(
"Flow of the speaker configurations" (p.92)
(
"Basic operation of the Setup menu" (p.180)
(
Adjusts the equalizer manually.
Adjusts each speaker to achieve the same characteristics.
Adjusts each speaker to achieve the same characteristics as the front speakers.
Adjusts each speaker to achieve the same characteristics with lowered high frequency range.
Does not use the equalizer.
201
Advertisement
Table of Contents
