Table of Contents
Advertisement
It shows the current state of AP. (You can see the IP address changed by the Get Status button)
l Model: It shows the name of model.
l Version: It shows the version of AP.
l Description: It is the name of AP designated by AP manager during AP setup.
l NAT: It shows whether the private IP address (NAT server) is enabled or not.
l DHCP: It shows whether the DHCP sever is enabled or not.
l Clients number: It shows the number of users currently connected with the AP.
l Internet connection: It is the connection type with outer network (LAN, ADSL, ISDN
etc.).
l IP Address: It shows whether the IP address is from DHCP server or NAT server.
l Connected Status: In case the connection type with the outside network is of
ADSL/CABLE type, it shows the connection state between AP and ASP service.
l IP: It is the IP address of the AP.
5.2.3 The 'Site Survey' button
It finds you the AP/Station that are connected currently. (It takes a few seconds to be done)
54
Advertisement
Table of Contents
