Yellow sign on the adapter, it shows the installation is not successful. In this case, select
the adapter and click on Remove. Restart your computer after uninstalling the driver to
make the changes effective. (See the Adapter Removal in section 3.7)
7. Of the icons displayed on the right bottom of desktop, click on icon
Wireless Network Connection.
When you are using DHCP, just select the AP that you want to connect in the Connect
8.
to Wireless Network above.
9. To manually set your IP address, WEP and some other configuration, click on
Advanced of the above picutre and then click Configure
Wireless Networks Tab . Set the SSID and parameters to be needed to modify and
then clicking on OK. The AP that you selected will be displayed on the
Networks.
Available networks
35
stated
on the
Prefered