Table of Contents
Advertisement
5. The main configuration of Program
During the installation of your SAMSUNG WLAN Card, configuration utility is also installed. You
can see the icon at the right bottom of your screen. Double clicking that icon will show you the
screen as shown below.
The following describes the meanings of variables shown in the WLAN configuration.
l Profile: The arbitrary designation by user. It is the profile name to distinguish each Profile.
So when you set the Profile, you would better choose the name that can send the
contents it has.
l Link Status: you Link Status shows a client connection state with AP (In Infrastructure
mode) or with other clients (In 802.11Ad-hoc Mode).
l SSID: It represents the name of a group consisting of WLAN users only. It is also called
ESSID.
l Operating Mode: There are three Modes. Infrastructure Mode (the connection among
clients through an AP), 802.11Ad-hoc/Ad-hoc Mode (direct connection among clients)
l BSSID: It shows the Physical Address of WLAN card inserted in AP in the
Infrastructure Mode and the Random Generation value in the 802.11 Ad-hoc Mode.
l Channel: It shows channel number in use for communication between AP and client or
among clients. When the Network Mode is set to the Infrastructure or 802.11Ad-
hoc/Ad-hoc Modes, it searches a channel automatically.
48
Advertisement
Table of Contents
