5.
Set a Keyboard for your computer.
6.
The next screen is for setting your monitor.
7.
First of all, set a horizontal frequency for your monitor. (You can enter the frequency
directly.)
8.
Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9.
Enter the model name of your monitor. This information will not affect the actual execution
of X-Window.
10. You have finished setting up your monitor. Execute X-Window after setting other re-
quested hardware.
IRTOUCH
Touchscreen Control PanelInstalling the Driver
Double-click the shortcut on the desktop, or go to "Start" -> "All Programs" -> "IRTouchSys-
tems" -> "TouchScreen Control Panel" (FIG. 5); then open the Control Panel for the
touchscreen.
Using the Software
FIG. (5)