Samsung SyncMaster 320TSn-3 User Manual page 100

Basic information required to adjust settings is displayed. Settings for the corresponding SET will be
and displayed on the slider if a display ID is selected, and the default settings will be displayed if all
are selected by clicking All and Select. If a value is changed in this screen, the current mode will aut
switch to custom mode.
1) Picture PC
- Available only for PC, BNC, DVI and DP.
2) Contrast
- Adjusts Contrast of the selected display.
3) Brightness
- Adjusts Brightness for the selected display.
4) Red
- Adjusts red Color of the selected display.
- Available only for NTSC.
5) Green
- Adjusts green Color of the selected display.
- Available only for NTSC.
6) Blue
- Adjusts blue Color of the selected display.
- Available only for NTSC.
7) Color Tone
- Adjusts the Color Tone for the selected display.
8) Color Temp