Using MagicInfo
To use MagicInfo with an TSn-3 model, install inside the product a network box specified by
Samsung and connect the MagicInfo output on the network box to [HDMI IN 2 (MAGICIN-
FO)] on the product.
Multi Control
Assigns an individual ID to the SET.
•
ID Setup
Assigns distinctive IDs to the SET.
•
ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
•
MDC Connection
Selects a port to receive the MDC inputs from.
•
RS232C MDC - Communicates with the MDC via a RS232C MDC cable.
•
RJ45 MDC - Communicates with the MDC via an RJ45 MDC cable.
•
Network Setting
•
IP Setting : Manual, Auto
•
IP Address : Manually enter the IP Address if IP Setting is set to Manual.
•
Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.
•
Gateway : Manually enter the Gateway if IP Setting is set to Manual.
MagicInfo
Available Modes
•
PC / DVI / DisplayPort
•
AV
•
Component
•
HDMI
•
MagicInfo
Adjusting the LCD Display