Contact Samsung - Samsung BD-DT7800 User Manual

Setup
By Channel
Upgrade software using the broadcasting signal.
By USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com/bluraysupport.
2. Download the latest USB software upgrade
zip archive to your computer.
3. Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
4. Copy the folder to a USB flash drive.
5. In the product's menu, go to Settings >
Support > Software Upgrade.
6. Select By USB.
NOTE
✎
` When the software upgrade is done, check the
software details in the Software Upgrade menu.
` Do not turn off the product during the software
upgrade. It may cause the product to malfunction.
` Software upgrades using the USB Host jack must be
performed with a USB memory flash stick only.
Via Download
The Via Download option lets you upgrade
using a file the product downloaded earlier but
you decided not to install immediately or a file
downloaded by the product in Standby Mode (See
Download in Standby Mode below).
To upgrade Via Download, follow these steps:
1. If upgrade software has been downloaded,
you will see the software version number to
the right of Via Download.
2. Select Via Download, and then press the
ENTER button.
3. The product displays a message asking if you
want to upgrade. Select Yes. The product
begins the upgrade.
4. When the update is complete, the product
turns off automatically, and then turns on.
NOTE
✎
` When the system upgrade is done, check the
software details in the Software Upgrade menu.
` Do not turn off the product during the Software
Upgrade. It may cause malfunction to the product.
46
English
Download in Standby Mode
You can set the Download in Standby Mode
function so that the product downloads new
upgrade software when it is in Standby mode. In
Standby mode, the product is off, but its Internet
connection is active. This allows the product to
download upgrade software automatically, when
you are not using it.
To set Download in Standby Mode, follow these
steps:
1. Press the ▲▼ buttons to select Download in
Standby Mode, and then press the ENTER
button.
2. Select the desired downloaded time.
If you select Off, the product will notify you
with a pop up message when new upgrade
software is available.
If you select the desired downloaded time,
the product will automatically download new
upgrade software when it is in Standby mode
with the power off.
If it downloads new upgrade software, the
product will ask you if you want to install it
when you turn the product on.
NOTE
✎
` To use the Download in Standby Mode function, your
product must be connected to the Internet.

Contact Samsung

Provides contact information for assistance with
your product.