Table of Contents
Advertisement
Setup
Edit Channel Number
Select this to edit the channel number in the
channel manager. (See page 31)
• Disable : Select disable if you do not want to
edit channel number.
• Enable : Select enable if you want to edit
channel number.
This menu will be displayed only when you set the
antenna source type and country as below.
Antenna source
Air
Digital Text
If the programme broadcasts with digital text, this
feature is enabled.
• Disable : Select disable if you do not want to
use digital text.
• Enable : Select enable if you want to use digital
text.
Common Interface
Show the CI Menu Information screen.
• CI Menu : This enables the user to select from
the CAM provided menu. Select the CI Menu
based on the menu PC Card.
• Application Info. : View information on the
CAM(Conditional Access Module) inserted into
the CI slot and on the "CI CAM with CI or CI+
CARD" which is inserted into the CAM. You can
install the CAM anytime whether the product is
on or off.
1. Purchase a CI CAM at your nearest dealer or
by phone.
2. Firmly insert the "CI CAM with CI or CI+ CARD"
into the CAM in the direction of the arrow.
38
English
Country
Ireland
3. Insert the CAM with the "CI CAM with CI or
CI+ CARD" into the common interface slot,
in the direction of the arrow so that it aligns
parallel with the slot.
4. Check if you can see a picture on a scrambled
signal channel.
NOTE
✎
` This Device is work with CI and CI+ CAM.
But in case of some local DVB-T association, this
device doesn't have perfect compatibility with all
kinds of CAM.
If there is a problem, pull the CAM CARD out of the
Set and insert it into the slot again.
Network
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you are using a wired or wireless
connection, we recommend using the Auto
procedures. If you are using a wireless connection
and your router has the capability, you can use
WPS(PBC) or One Foot Connection.
If your IP address is static, you must use the
manual set up procedure for both wired and
wireless connections.
Network Settings
To begin setting up the network connection for
your product, follow these steps:
1. In the Home menu, press the ◄► buttons to
select Settings, and then press the ENTER
button.
2. Press the ▲▼ buttons to select Network, and
then press the ENTER button.
3. Press the ▲▼ buttons to select Network
Settings, and then press the ENTER button.
4. Press the ▲▼ buttons to select Wired,
Wireless (general), WPS(PBC) or One Foot
Connection, and then press the ENTER
button.
5. If you have a wired network, go to Wired
Network below. If you have a wireless
network, go to Wireless Network on page 39.
Hide quick links:
Advertisement
Table of Contents
